Do you want to give your driveway a makeover without breaking the bank? Do you love the look of cobblestone streets and rustic charm? If you answered yes to both questions, then consider using Belgium blocks to enhance your curb appeal.
Belgium blocks, also known as granite setts, are small rectangular blocks traditionally used for paving roads and sidewalks. They come in various colors, sizes, and shapes, and they can create a beautiful contrast with your asphalt or concrete driveway.
In this blog post, we will show you how to use Belgium blocks to create a DIY driveway makeover that will make your neighbors jealous.
Getting Started: Planning and Preparation
Are you looking for a chic and distinctive approach to improve your house’s curb appeal? Consider Belgium blocks for sale.
- Plan your design.
Before you start digging, you need a clear idea of how you want your driveway to look. Do you want to use Belgium blocks as a border, an accent, or a full replacement for your driveway? How many blocks do you need, and what color and size do you prefer? You can also sketch your design on paper or use an online tool to help visualize your project.
- Prepare your materials.
You will need these materials for your DIY driveway makeover: Belgium blocks, gravel, sand, landscape fabric, edging stakes, hammer, shovel, level, tape measure, string, chalk line, saw, and gloves. You can buy Belgium blocks from local stone suppliers or online retailers like this one. Ensure you order enough blocks to cover your desired area and some extra for cutting and fitting.
- Mark your area.
Use the tape measure, string, and chalk line to mark the outline of your driveway makeover on the ground. Ensure the lines are straight and parallel to your house and the street. You can also use spray paint or stakes to mark the corners and curves of your design.
- Dig your trench.
Use the shovel to dig a trench along the marked area. Trench depth should be 6 inches, and width should be 12 inches. You can use the saw to cut through any roots or obstacles. Dispose of the soil or use it for other landscaping projects.
- Lay the landscape fabric.
Cut the landscape fabric to fit the trench and lay it over the bottom and sides of the trench. This will stop weeds from growing between the blocks and help drainage.
- Fill the trench with gravel.
Pour gravel into the trench until it is about 4 inches deep. Use the level to make sure the gravel is even and compacted. You can use a tamper or a wooden board to tamp the gravel.
- Lay the Belgium blocks.
Start from one end of the trench and lay the Belgium blocks on the gravel. Use the hammer to tap them into place and ensure they are level with each other and the ground. You can use a rubber mallet or a piece of wood to protect the blocks from damage. Leave a 1/4 inch gap between each block for sand filling.
- Cut and fit the blocks.
You may need to cut some blocks to fit around the curves or corners of your design. You can cut the blocks with a circular saw, diamond blade, chisel, and hammer. Be careful not to crack or chip the blocks, and wear safety goggles and gloves when cutting.
- Fill the gaps with sand.
Pour sand over the Belgium blocks and use a broom or a brush to sweep them into the gaps between them. This will lock them in place and prevent them from shifting or sinking.
Enjoy your new driveway!
You have just completed your DIY driveway makeover using Belgium blocks! Now, you can appreciate your work and enjoy the enhanced curb appeal of your home.
The Final Words
Congratulations on completing your DIY driveway makeover! Belgium blocks have added a touch of elegance and sophistication to your home’s curb appeal. With proper care and maintenance, your Belgium block driveway, made from high-quality Belgium, will last many years. If you’re looking to enhance your driveway with these beautiful stones, you can find Belgium blocks for sale.